Lock In Them Brass Pipes

When people think of brass, they often visualize the horn section of a marching band, or perhaps the metalwork in architectural designs. Do you know that brass can also be favorable as material on the plumbing front, such as square brass tubing?

Brass plumbing fixtures present no problems for drinking water. It resists corrosion effectively and it does not rust. In fact, brass is known to even possess anti-microbial properties. Studies conducted at the Center for Applied Microbiology and Research (CAMR) discovered that bacteria cannot survive for long periods on brass and copper surfaces, unlike in stainless steel.

Get to Know More about Muntz Metal

Muntz metal is a copper alloy known for its yellowish color and high resistance to corrosion. It was first patented in 1832 by George F. Muntz in Birmingham, England, using the composition of 60% copper, 40 % zinc, and allegedly a few traces of iron as an alternative to expensive heavy copper. This alloy is noted to be considerably stronger, harder, and more rigid than other brass types and forms. Muntz usually undergoes blanking, bending, forming, forging, pressing, shearing, hot heading, and upsetting, before the yellow metal is finished. The process is made even more complicated by the unique way that the metals are blended at different times.

The 3 Major Types of Bronze Available

There are three known major types of bronze, each with its own composition and intended use.
These are:

1. Statuary Bronze – This type of bronze is usually a composition of 97% copper, 2% tin, and 1% zinc.   The finished material then treated with acidic chemicals in order to produce a dark brown color. This type of bronze is commonly used for statues and other bronze art figures and objects.

2. Architectural Bronze – usually made up of 57% copper, 40% zinc, and 3% lead, but can also incorporate other metals of varying percentages. Architectural bronze is known for its great tensile strength, and better resistance to corrosion which makes this type of bronze ideal for architectural needs. This type of bronze was already noted during the 18th century to be perfect for window casements and such.

Noted Brooklyn Artisan Sources Bronze Bars for Decor from Rotax Metals

Rotax Metals, one of the country’s leading suppliers of bronze bars and extrusions, is proud to announce that the works of its customer, Vallessa Monk, have been recently featured in the Wall Street Journal. The 48-year old Brooklyn-based metal sculptor was discovered for her unique furniture designs. With tools for bending, hammering, and texturing, Ms. Monk creates bespoke and elegant window grilles, tables, planters, stairs, banister and other furnishings out of steel and bronze sourced from our very own inventory. “For AKA’s Central Park and Sutton Place properties, Ms. Monk used her signature technique of giving steel surfaces a dramatic patina by applying chemicals either cold by hand-held cloth, or hot via a torch to make ‘the color blossom’”, the Wall Street Journal article noted. AKA is a collection of luxury extended-stay residences and condominiums with properties in different states.
http://www.rotaxmetals.net/noted-brooklyn-artisan-sources-bronze-bars-for-decor-from-rotax-metals/

When Engraving Brass Plaques with Laser Beams is a Workable Solution

Plaques are common gifts at any testimonial event or official unveiling. Such items help honor the person of the hour or a milestone. Creating one in the first place, however, can entail using some special techniques, such as laser devices to make the desired labelling on the plaque, which may be made of engraved brass. In an article for the Engravers Journal, writer Jennifer McCready said the addition of brass as an engraving material can break the monotony of using a certain type of material time and again. It’s even better if you source the base material from a company like Rotax Metals, Inc,
http://www.rotaxmetals.net/when-engraving-brass-plaques-with-laser-beams-is-a-workable-solution/

Going to a Company Doing Brass Sales to Acquire Bar Foot Rail Tubes

When a contractor is tasked to remodel a small physical space into a bar, extensive ideas in bar design come into play and every feature you can think of can be included. Foot rails are often taken into the equation, given the height and size of the bar top itself. Getting the brass materials you need, though, can be done through brass sales specialists such as Rotax Metals. Parts Sourcing Foot bar rails consist of the attachment brackets, the long tubes and the end caps. The tubes you can find at your brass supplier will normally come in lengths of 144 inches or 12 feet. The diameters and thicknesses for each piping product also differ, while the thickness and the material should also enable the piping to withstand wear and tear and the weight of the patrons’ feet even if they are lightly stepping on the railing.
http://www.rotaxmetals.net/going-to-a-company-doing-brass-sales-to-acquire-bar-foot-rail-tubes/

Engraving Brass Products: A Basic Introduction

Brass engraving is made possible by the material’s high malleability. Brass is an extremely popular material for various luxurious and antique decorative items like wine glasses, plaques, furniture parts and trophies. Though laser technologies are widely used by professional brass engravers, manual equipment like the rotary tool still have their place in brass engraving for commercial and individual use.

Quality Brass Plumbing Ensures Satisfaction

Delivering water to every part of the house 24/7 can put a lot of stress on your home’s plumbing. This is why you’ll want your system built from quality materials.

Brass, an alloy of copper and zinc, is one of the many different materials used in metal plumbing fittings today. Since equal proportions of copper and zinc make the pipe susceptible to corrosion, a brass tube for plumbing would ideally be made with 67 to 85 percent copper and 15 to 33 percent zinc. The best grade of brass pipes, also known as the red brass pipe, is made of 85 percent copper. Brass pipes will not be affected by water, unless the water contains ammonia or is soft.

Crafting Photo-etched Parts

The scale modelling world is filled with people who take a liking to crafting kits into true works of art, and even showcase the finished model at various events. In many cases, the finished piece even includes photo-etched brass parts to give the model kit added detail. When you are considering crafting some photo-etched brass parts of your own, you don’t have to look far for some brass for sale.

Sheet Metal Suppliers: Working With Copper Sheets as an Art Medium

Copper in its many forms has been used throughout the ages for various applications including architecture, power generation, industrial production, and more. It is also one of the most popular art medium for craftsmen and artisans, then and now. Premier sheet metal suppliers in the country today say that copper sheets are among the most widely used canvas and material for many different artworks. This is due to the highly workable surface of the metal sheets primed for embossing or structuring. Copper Art in the Past Many renowned artists such as Rembrandt, Chardin, Brueghel, Reni, El Greco and Wtewael experimented with copper. Many of such artworks produced by these master painters of the Renaissance era were painted not on canvas but on copper. This is likely because resources for canvas, brushes, paints and other art materials were scarce. Copper was high in supply, on the other hand, and was used to great effect.
http://www.rotaxmetals.net/sheet-metal-suppliers-working-with-copper-sheets-as-an-art-medium/

Copper and Brass Sales: Importance of Soldering in Jewelry Making

Aside from gold and silver, copper and brass are among the most popular metals used in jewelry-making, and their finished products are as stunning as jewelry made of precious minerals and metals. To craft fine pieces of jewelry out of these two metals, jewelry-makers solder and mold them into different forms. The problem with soldering these two metals is that they have earned a reputation for being among the “nasty metals” due to their tendency to oxidize rapidly when heat is applied. When you’re using a torch and a solder in crafting your pieces, the first step is to always get quality materials from copper and brass sales. After acquiring the needed supplies, keep in mind these helpful tips on soldering.
http://www.rotaxmetals.net/copper-and-brass-sales-importance-of-soldering-in-jewelry-making/

Creating a Stunning Work of Art with Help from a Copper Sheet Supplier

Malleable, durable and lustrous, copper sheets have long before been used in artworks by artists and craftsmen aiming for a variety of looks, be it reproductions of artifact imagery or rustic décor. From something illustrious like paintings to something nondescript like lamp covers and luminaria, artists and craftsmen turn to many a trusted copper sheet supplier for quality copper they can use in their artworks and projects. Copper as a Canvas Rembrandt, El Greco, Reni and Chardin all had something in common: they produced some of the finest art masterpieces on a copper sheet. Artists who were alive during the Renaissance era exercised their creativity and prodigious skills with canvases made of copper, which are still being used today.
http://www.rotaxmetals.net/creating-a-stunning-work-of-art-with-help-from-a-copper-sheet-supplier/

Why Expert Builders Choose Solid Brass Tube for Plumbing Fixtures

Brass has proven itself an ideal metal for modern construction projects, but it has also long been the preferred material for plumbing system component, especially the water pipes and the valves. It is extraordinarily resilient, and malleable enough to fit precisely detailed parts. Sometimes, it could be difficult to identify brass fixtures in the home because the parts you need to see are covered by some other material like opaque plastic or shiny chrome. However, regardless of its outside appearance, solid brass tube is a go-to material among expert builders for plumbing needs, as it assures a lifetime of reliability.
http://www.rotaxmetals.net/why-expert-builders-choose-solid-brass-tube-for-plumbing-fixtures/

Three Industries That Simply Cannot Do Without Using Brass Sheet Metal

Aside from its attractive appearance, brass is a well-loved material thanks to its high utility value. It is one of the most versatile metals used in the construction and manufacturing industries. It also has a higher resistance to most forms of corrosion, doesn’t require too much maintenance and is very durable. Ultimately, brass is like a super metal. Here are three key businesses that rely on brass sheet metal for their industrial needs. Automotive Automobile manufacturers have used their fair share of brass and its alloys in their products. Car and truck radiators usually made with aluminum are now being challenged by copper-brass alloys. These new radiators are about forty percent lighter than their aluminum counterparts and are correspondingly cheaper. Once these brass radiators make their official debut, studies suggest that they could last for about ten years, which is good news for current and prospective car owners.
http://www.rotaxmetals.net/three-industries-that-simply-cannot-do-without-using-brass-sheet-metal/

Malleable Brass Tube and Many Other Forms: Versatility of Brass Alloys

The alloy brass comes in many forms. It is available as a long brass tube or a piece of large sheet metal, for example. These variations are possible because of brass’ properties that make it among the most versatile alloys in existence today. It is also one of the most sought-after alloys because of its many favorable qualities, foremost of which is its resistance to certain types of corrosion. Additionally, brass boasts acoustic properties, malleability, low friction, low melting point, good flow capabilities when melted, bacteriostatic properties, good heat and electric conductivity, favorable aesthetics, and many more.
http://www.rotaxmetals.net/malleable-brass-tube-and-many-other-forms-versatility-of-brass-alloys/

Metalworking Value that Brass Sheet Metals Bring Into the Industry

Brass is one of the alloys that have been in wide use within the metalworking industry. How Products Are Made emphasized that it is classified as a copper alloy as its main component is copper. The other primary ingredient is zinc.
http://www.rotaxmetals.net/metalworking-value-that-brass-sheet-metals-bring-into-the-industry/

Brass Sheet Metal: Suitable Substitute for Making Fashion Jewelry

Gold and silver might be the most preferred metals when it comes to jewelry-making, but not every artisan or fashion jewelry maker has some gold or silver to spare especially in mass production. Gold and silver are two of the most precious metals in the world, which also means that they command a high price. With affordability as a problem, fashion jewelers often turn to other metals. Brass is a copper alloy that makes for a suitable substitute in making fashion jewelry. Yellow brass sheet metal, in particular, is ideal for crafting jewelry for a number of different reasons.
http://www.rotaxmetals.net/brass-sheet-metal-suitable-substitute-for-making-fashion-jewelry/

Quality Bronze Bars and Sheets for Use in Many Industrial Applications

Bronze has surprisingly almost limitless uses in modern industry. Metal craftsmen have used bronze to create both highly decorative and utilitarian objects for service from architectural structures to beautiful public artworks, and from electronics to various industrial applications. Bronze with a composition primarily of copper, can be shaped or extruded into bronze bars, tubes, or sheet metals, and, and in turn, are smelted into a variety of objects, tools, component parts, and other applications. Bronze is one of the few metals in the world with characteristics that make the material ideal for applications in the arts, commerce and industry. Here are some of the reasons why bronze is the quintessential metal to work with.
http://www.rotaxmetals.net/quality-bronze-bars-and-sheets-for-use-in-many-industrial-applications/