Brass Angle Bars and Their Many Useful Applications

An angle bar, also known as “L Bracket”, is a metal bracket used to provide stability to structures. It is often installed within or along the edges of beams and other platforms that may not have enough capacity to carry the expected load. Due to the tough work required, an angle bar is usually made of galvanized steel, a metal known for its high corrosion resistance and tensile strength. That, however, is only one of the many uses of angle bar.

Inside your home or workplace, you will see quite many objects that have at least a piece of angle bar in them. Of course, these angle bars are not made of galvanized steel since they are mostly used for decorative purposes and not for holding structural loads. Besides, galvanized steel angle bars don’t look as appealing as you would want your furniture and other decorative elements in your home or workplace to look. Read more from this article: http://bit.ly/2z7IwHC

Achieve Elegant Design by Using Copper, Bronze, or Muntz Metal Tiles

Elegance is defined as the perfect blend of gracefulness and style. An elegant design is one that is attractive, sophisticated and often times elusive, making it a worthwhile goal to achieve if you want to improve the look of a space. Elegance certainly attracts a favorable and lasting impression.

Due to its upscale nature, chasing elegance can seem like a daunting and difficult endeavor. That said, you don’t have to take obsolete or expensive approaches to have elegance in your design. Elegant design is possible for every style and taste, and sometimes, using the right material can be enough. Read more from this article: http://bit.ly/2z0Cs3B

Bronze Sheet Metal Facts: The Case of the Cracked Bell

In 1751, a large bell, called the Liberty Bell, was hung in the new Independence Hall of the Pennsylvania Provincial Assembly. Unfortunately, it cracked during the test strike and had to be recast twice. It was said that the bell was too brittle and couldn’t keep a loud, smooth sound for long. This wasn’t an isolated case, though. Around the world, many old bells can be seen with similar cracks found on the Liberty Bell.

The Big Question: Why Was the Bell Brittle?

Apparently, there’s more to making a bell than just melting and casting metal. There’s choosing the right metals to combine, deciding the amount of each metal in the alloy, and making the perfect cast. The first part of the process alone can be nerve-wracking, especially if you don’t have prior experience in metallurgy or at least in alloying metals. Read more from this article: http://bit.ly/2km5pT2

Bronze Sheets Make for an Elegant and Beautiful Rain Gutter Material

Rain gutters serve one purpose—to divert the flow of rainwater away from your roofing, walls, structure and landscape. Without it, much of your property’s structure could get drenched, and over time can result in significant water damage. Naturally, you’ll prioritize function over form with your rain gutter. But what if you can have both? With bronze sheets, you can have rain gutters that not only do their job in protecting your home or business, but also enhance the appearance of your property.

Bronze or copper gutters are most often found on high end homes. Bronze sheets in particular, are the gutter material of choice for many designers and architects due to the natural, beautiful sheen that they possess. Bronze is also durable, strong, and resistant to damage and corrosion. Plus, they are ductile and easy to shape. Even further, mold, moss, and mildew do not grow on them, making bronze sheets the ideal metal to use for rain gutters. Read more from this article: http://bit.ly/2AWDW0l

Four Variables That Will Affect the Natural Patination Process of a Bronze Tube

Whether you’re using bronze tubes for an architectural project or an art installation, it’s important to think ahead in terms of how your piece will look in the future. Despite its timeless appeal, bronze is a material that undergoes a lot of changes. Over time and when exposed to the elements, bronze undergoes a natural process called patination. Patina is a tarnish that forms on the surface of bronze through oxidation. It results in the distinct blue-green coating or some other shading you might see on old copper roofs and bronze statues.

Although patina is considered as a sign of wear and aging, no one can deny that it adds to the charm and appeal of a masterpiece. In fact, you’d be surprised at how much more valued some bronze structures are for their coloring. Just take for example New York’s grandest landmark, the Statue of Liberty, which was first placed on Liberty Island in 1886. It originally had a shiny copper gold color but has long since turned into the blue-green icon that it is today. Read more from this article: http://bit.ly/2kIIVuU

Copper Sheet Supplier: Copper Roofs Can Help Protect Structures from Lightning

Copper is highly regarded by craftsmen and artisans for its excellent properties, such as corrosion resistance, electrical or thermal conductivity, and ease of fabrication. One often overlooked trait of this material, however, is its propensity for lightning protection. What many don’t know is that when copper roofing is used in conjunction with lighting protection systems made of copper components in the gutters, rain leaders and wall claddings, it serves as an ideal lightning damage deterrent.

Lightning Damage

It’s a universal fact that lightning is severely dangerous when it strikes, but how much damage does it inflict on structures? According to research compiled by the Insurance Information Institute, the homeowners insurance claims from lightning strikes and electrical surges saw a huge increase in 2016 compared to 2015. A 4.5 percent change in claims now puts the total payout for lightning losses at $825.7 million dollars. Read more from this article: http://bit.ly/2B4eFpv

Facts You Should Know about Copper before Asking Where to Buy Copper Sheets

Most metals have practical uses, but there are a few that stand out in terms of application. Copper, for example, is used for making a wide range of valuable materials, including electrical wires, semiconductors, electromagnets, and many more. This, however, is just a tiny fact about copper that you most likely already know. Following are some of the facts about copper that you probably didn’t know.

Copper Is One of the Oldest Metals Discovered

The term “copper” was derived from the Latin word cuprum, which means “from the island of Cyprus”. Even so, this metal did not originate from Cyprus. There’s no record stating exactly where copper was first discovered and mined, but the oldest copper-based artifact was unearthed at Tel Tsaf, an archeological site in Israel. The artifact is a cone-shaped awl measuring about four centimeters long and one millimeter thick. Read more from this article: http://bit.ly/2kDVK9H

Sheet Metal Suppliers Ought to Understand the Malleability of Metals

Malleability refers to the ability of metal to be stretched or compressed into thin sheets through applied pressure. It is measured by the compressive stress a metal can tolerate without breaking or tearing. This property is unique to certain metals and considered useful for many different applications, which range from scientific to everyday use.

Some of the well-known malleable metals include gold, silver, iron, aluminum, copper, and tin. Most of them are extensively used for applications that require flat metal pieces. Gold and silver, for instance, are used for making coins and jewelry, while iron and aluminum are often compressed into panels, which are used for covering machines and structures. Read more from this article: http://bit.ly/2yvRnCE

Copper, Bronze, and Brass Sales: Knowing the Difference between These Three Valuable Metals

According to the International Copper Study Group (ICSG), global copper production has declined by around two percent due to shortages in various countries, including Chile (the world’s biggest copper producer), Canada, and Mongolia. Copper, however, remains to be in demand globally because of its use in various industrial applications and the fact that it has no substitutes.

Copper in its purest form has a myriad of end-uses, including tubing for heat exchangers, agricultural sprinkler systems, and seawater feedlines. To expand its use, manufacturers alloy copper with other metals, such as tin and zinc, to form even stronger and more durable materials. Copper, when alloyed with zinc, produces brass. When alloyed with tin, it produces bronze. Following are the main differences between these three metals. Read more from this article: http://bit.ly/2C3EUbq

Copper & Brass Sales—Why Mold Makers Now Prefer High-Performance Copper Alloys to Steel

Have you ever wondered how the different metal parts in your vehicle or in any good-sized machine in your home or workplace were made? With their precise cuts, shapes, and sizes, there’s no way they could have been sculpted by human hands. Even the most skillful metalworkers are incapable of cutting through extremely tough materials like metal with such precision and accuracy. Actually, the process of making these metal pieces is a little bit more complicated than that. Instead of being carved out of raw metal blocks, they are formed through casting.

Casting refers to the process of pouring liquid metal into a mold and allowing it to cool and solidify into a certain shape. The hollow inside the mold is where the magic of casting takes place. Its dimensions have to be exact in order to produce high-quality casts. There are, however, many other factors that can influence the final output. One in particular is the type of metal that the mold is made of. Read more from this article: http://bit.ly/2Ai5yNq