Pages

Friday, February 2, 2018

Cleaning the Tarnish off Brass Square Tube Pieces the Right Way

Brass square tube pieces are very versatile and can be used for a number of applications. Due to brass’ malleability they are commonly re-molded into parts of furniture, accessories, and sometimes also as a part of plumbing fixtures. Although brass is known for being rust and corrosion resistant, the alloy isn’t safe from gradual tarnishing. During these cases, you can still clean and polish the pieces to breathe new life to them.


The key is to do the cleaning and maintenance regularly and correctly. Here’s how you can do that:

1. Check and Determine the Condition

Traditionally brass tubes and other brass pieces come with a layer of lacquer to protect them from tarnish. Usually when pieces are severely tarnished, this means they do not have lacquer as protection. Other times, the lacquer will being to chip over time and this means a professional might have to restore the piece for you. Otherwise, cleaning brass isn’t too hard.

2. Lightly Tarnished Pieces

The best way to clean lightly tarnished brass square tubing and pieces is to use hot soapy water and a soft clean cloth. Simply wipe the surface using the soapy water and cloth, use a soft bristled toothbrush if there are hard to reach crevices and you are done. Be sure to only use mild detergent as strong chemicals can do damage on the surface of the tubes. Wipe the pieces dry and begin polishing.

3. Heavily Tarnished Pieces

There are two ways to clean heavily tarnished brass square tubing. First, commercial cleaners are very effective and make the job easier. However, these chemicals can be too strong and may cause a lot of damage when used too much. Try to avoid using commercial cleaners as much as possible.

Homemade cleaners are also great for removing tarnish. These are options for homemade tarnish remover:

        Ketchup – This kitchen staple is also a lifesaver when it comes to taking out tarnish. Many DIY housekeepers stand by using the condiment for cleaning tarnished brass pieces. Simply rub the ketchup on the piece, wipe clean, and buff it dry.
        Lemon Juice – Another cleaning agent commonly found inside kitchens can also double as tarnish remover. The acidic nature of lemon juice brings back the shine. After cleaning, make sure to wipe using a damp cloth and buff while drying to make it gleam brighter.
        Flour, Salt, and Vinegar Mix – Easy to find ingredients inside the panty. Combine half a cup of vinegar with 1 teaspoon of salt and add enough flour to create a paste. Rub the mixture on the tarnished spots for 10 minutes and then rinse it off using warm water. Buff and dry!

Where To Get High-Quality Brass Square Tubing and More

It is instrumental to purchase metals like brass square tubing and similar products from a company that care about their customers and the environment. At Rotax Metals, there are two main priorities: sustainability and customer satisfaction. Every purchase you make is a good investment on your part and on the health of the environment. Trust only the providers of high-quality metal pieces that have been in business for 70 years and counting.


Sources:
How to Clean Brass: The Best Ways to Polish Brass, ArchitecturalDigest.com
How to Clean Brass, DIYNetwork.com
How to Clean Brass Naturally, MNN.com

No comments:

Post a Comment